|
|
  |
P 1 |
TOP SHELF. Top shelf materials, a tried-and-true geometry, and testing on every terrain imaginable give the P. Series boundary-busting performance that'll test your courage and help you top the rest. Almost ten years ago, when we first started making the P. Series, it was a little bit of an experiment, and we weren't quite sure where it was headed. We just knew we needed a rock-solid rig that could handle everything from dirt jumping to urban assault and freeriding to skate part sessions. As the sport's evolved, so has the P., and today it features one of the most refined and advanced frames--built from either A1™ alloy or 100% Cr-Mo steel--and a parts pick that's tough enough for any terrain.
|
 |
Size |
L |

|
Seat Tube Length - Center to Top |
363mm |

|
Top Tube Length (Horizontal) |
585mm |

|
Top Tube Length (Actual) |
568mm |

|
Chainstay Length |
402mm |

|
Bottom Bracket Height - Low Setting |
300mm |

|
Seat Tube Angle (Actual) - Low Setting |
71deg |

|
Head Tube Angle - Low Setting |
69deg |

|
Wheel Base |
1041mm |

|
Standover Height |
722mm |

|
Head Tube Height |
110mm |

|
Handlebar Width |
640mm |

|
Stem Length |
40mm |

|
Crank Length |
175mm |

|
Seatpost Length |
300mm |

|
TT is measured horizontally from center of HT to center of ST |
Weight
N/A
Frame
Specialized 100% Cr-Mo, double-butted HT/DT
Externally relieved HT, disc mount
6mm offset horizontal drop out for 26" wheel
Replaceable alloy hanger, disc only
Fork
Marzocchi DJ3, 100mm,
32mm Cr-Mo stanchions and 1 1/8" Cr-Mo steerer
Fixed rate catridge damping
Coil/mcu with preload adj, "stiff" spring
Headset
Tank FX, 1 1/8" threadless with hollow bolt
Rear Derailleur
N/A
Front Derailleur
N/A
Shifters
N/A
Brake Levers
Avid FR-5
Brakes
Avid BB-5, mechanical disc
6" G2 Clean Sweep rotor
Crankset
Fuse tubular heat treated Cr-Mo 3pc, 175mm
Chainrings 34A with poly bash guard
Bottom Bracket Set
Fuse Euro, alloy cups, 4x cartridge bearings
19mm heat treated Cr-Mo 8 spline spindle
Handlebar
Specialized butted alloy 31.8mm
640mm wide, 50mm rise, 8 degree back, 8 degree up sweep
Headstem
Truvativ Hussefelt, forged alloy, 31.8mm, 0 degree rise
Pedals
Specialized alloy platform, 9/16"
Seatpost
Specialized two bolt, no offset, micro adjust, 30.9mm
Seat
Specialized Fuse, 8mm rails, PVC bumpers front and rear
Front Hub
Specialized P.Disc, CNC high flanges and disc mounts
36h, nutted 3/8" axle
Rear Hub
Specialized P.Disc, cassette, CNC high flanges and disc mounts
36h, nutted 3/8" axle
Chain
KMC Z-610H, 1/2" x 3/32"
Cassette
/2"x3/32"x16t Cr-Mo cog
Shimano spline and conversion spacers
Spokes
1.8mm (15g) stainless
Rims
Specialized/Alex HRD 26
Double wall disc with eyelets
Tyres
Front,
Specialized Rhythm Control, 26x2.3", 60TPI, aramid bead
Rear,
Specialized Compound Control, 26x2.2", 60TPI, aramid bead
Note prices and specifications subject to change without notice.
|