P 2

TOP SHELF. Top shelf materials, a tried-and-true geometry, and testing on every terrain imaginable give the P. Series boundary-busting performance that'll test your courage and help you top the rest. Almost ten years ago, when we first started making the P. Series, it was a little bit of an experiment, and we weren't quite sure where it was headed. We just knew we needed a rock-solid rig that could handle everything from dirt jumping to urban assault and freeriding to skate part sessions. As the sport's evolved, so has the P., and today it features one of the most refined and advanced frames--built from either A1™ alloy or 100% Cr-Mo steel--and a parts pick that's tough enough for any terrain.

2008 P 2 $1599.99

Weight
N/A

Frame
A1 Premium Aluminum, double-butted ORE DT
Forged HT/ISCG BB/chainstay yoke/horizontal dropouts
Integrated chain tensioner and axle carrier
Replaceable alloy hanger, disc only

Fork
Marzocchi DJ2, 100mm
32mm alloy stanchions and Cr-Mo steerer
One piece magnesium lower, cold forged alloy crown
RV damping with reb. adj.
Air assist "stiff" coil spring with preload adj., disc only

Headset
Tank FX, 1 1/8" threadless with hollow bolt

Rear Derailleur
SRAM X-5, short cage

Front Derailleur
Specialized ISCG chain guide

Shifters
SRAM X-5 trigger

Brake Levers
Hayes Stroker Ryde, hydraulic

Brakes
Hayes Stroker Ryde, hydraulic
Front 6" v-cut rotor
Rear 4" v-cut rotor

Crankset
Fuse tubular heat treated Cr-Mo 3pc, 175mm
Chainring 34t

Bottom Bracket Set
Fuse Euro, alloy cups, 4x cartridge bearings
19mm heat treated Cr-Mo 8 spline spindle

Handlebar
Specialized butted alloy 31.8mm
640mm wide, 50mm rise, 8 degree back, 8 degree up sweep

Headstem
Truvativ Hussefelt, forged alloy, 31.8mm, 0 degree rise

Pedals
Specialized alloy platform, 9/16"

Seatpost
Specialized two bolt, no offset, micro adjust, 30.9mm

Seat
Specialized Fuse, 8mm rails, PVC bumpers front and rear

Front Hub
Specialized P.Disc, CNC high flanges and disc mounts
36h, nutted 3/8" axle

Rear Hub
Specialized P.Disc, cassette, CNC high flanges and disc mounts
36h, nutted 3/8" axle

Chain
KMC X8, 1/2" x 3/32" with reusable Missing Link

Cassette
SRAM PG-830, 8-speed, 11-28t

Spokes
1.8mm (15g) stainless

Rims
Specialized/Alex HRD 26
Double wall disc with eyelets

Tyres
Front, Specialized Rhythm Control, 26x2.3", 60TPI, aramid bead
Rear, Specialized Compound Control, 26x2.2", 60TPI, aramid bead





Note prices and specifications subject to change without notice.