Store
Home  |  Ride + Race   |  About Us  |  Contact
P Grom

TOP SHELF. Top shelf materials, a tried-and-true geometry, and testing on every terrain imaginable give the P. Series boundary-busting performance that'll test your courage and help you top the rest. Almost ten years ago, when we first started making the P. Series, it was a little bit of an experiment, and we weren't quite sure where it was headed. We just knew we needed a rock-solid rig that could handle everything from dirt jumping to urban assault and freeriding to skate part sessions. As the sport's evolved, so has the P., and today it features one of the most refined and advanced frames--built from either A1™ alloy or 100% Cr-Mo steel--and a parts pick that's tough enough for any terrain.



2008 P Grom
$1799.99

   

Specifications

Size

L

Seat Tube Length - Center to Top

332mm

Top Tube Length (Horizontal)

550mm

Top Tube Length (Actual)

536mm

Chainstay Length

390mm

Bottom Bracket Height - Low Setting

295mm

Seat Tube Angle (Actual) - Low Setting

71deg

Head Tube Angle - Low Setting

69deg

Wheel Base

1006mm

Standover Height

684mm

Head Tube Height

110mm

Handlebar Width

620mm

Stem Length

40mm

Crank Length

165mm

Seatpost Length

300mm

TT is measured horizontally from center of HT to center of ST


Weight

N/A

Frame
Specialized 100% Cr-Mo, double-butted HT/DT
Externally relieved HT, disc mount
6mm offset horizontal drop out for 24" wheel
Replaceable alloy hanger, disc only

Fork
Marzocchi DJ3, 100mm
32mm Cr-Mo stanchions and 1 1/8" Cr-Mo steerer
Magnesium lower, fixed rate catridge damping
Coil/mcu with preload adj., "stiff" spring

Headset
Tank FX, 1 1/8" threadless with hollow bolt

Rear Derailleur
SRAM X-5, short cage

Front Derailleur
Specialized ISCG chain guide

Shifters
SRAM X-5 trigger

Brake Levers
Avid FR-5

Brakes
Avid BB-5, mechanical disc
6" G2 Clean Sweep rotor

Crankset
Fuse tubular heat treated Cr-Mo 3pc, 165mm
Chainrings 34t

Bottom Bracket Set
Fuse Euro, alloy cups, 4x cartridge bearings
19mm heat treated Cr-Mo 8 spline spindle

Handlebar
Specialized butted alloy 31.8mm
620mm wide, 50mm rise, 8 degree back, 8 degree up sweep

Headstem
Truvativ Hussefelt, forged alloy, 31.8mm, 0 degree rise

Pedals
Specialized alloy platform, 9/16"

Seatpost
Specialized two bolt, no offset, micro adjust, 30.9mm

Seat
Specialized, 7mm rails, front and rear bumpers

Front Hub
Specialized P.Disc, CNC high flanges and disc mounts
36h, nutted 3/8" axle

Rear Hub
Specialized P.Disc, cassette, CNC high flanges and disc mounts
36h, nutted 3/8" axle

Chain
KMC X8, 1/2" x 3/32" with reusable Missing Link

Cassette
SRAM PG-830, 8-speed, 11-28t

Spokes
2.0mm (14g) stainless

Rims
Specialized/Alex HRD 24
Double wall disc with eyelets

Tyres
Front, Specialized Rhythm Sport, 24x2.2", 30TPI, wire bead with flack jacket
Rear, Specialized Compound Sport, 24x2.1", 30TPI, wire bead with flack jacket





Note prices and specifications subject to change without notice.


Web Work: Ryan Goddard
& Doug Mason